Rust Correct is an innovative rust converter and coating system of industrial quality. It effectively halts the progression of rust and creates a durable resin coating, providing exceptional protection against elevated temperatures and mechanical impact. Each 32 oz (946mL) covers an area of up to 220 sq ft.

Storage: Avoid frost/freezing; store between 5C and 50C.

Use:
1) Degrease the surface, then treat with Salt Breaker to ensure coating adhesion.
2) Wire wheel or otherwise remove all loose rust from the surface (no need to go down to bare metal).
3) Blow surface clean to remove any dust.
4) Shake Rust Correct bottle thoroughly to mix.
5) Pour required amount into a separate container - DO NOT use directly out of this package as rust contamination will activate the product, causing it to harden prematurely.
6) Brush, roll, or spray Rust Correct on surface rust. Thoroughly work into surface with a circular motion; deeply penetrate all areas of active corrosion.
7) Converter will turn from white to black in areas affected by rust.
8) If area(s) are missed with first application, wait 30 minutes before recoating the same area(s).
9) Product will dry to touch in 30 minutes, fully cure in 24 hours.
10) If exposed to sunlight, yellowing may occur. A topcoat, such as Spectrum's SP-26 Thixotropic black semi-gloss paint is recommended. If a topcoat is desired, apply after Rust Correct is fully cured.